Filter
Top Products
Vigor3300 Series User’s Guide
95
z For Default Configuration
To edit or add a policy table, please click one of the radio buttons and click Edit. The
following page of default configuration will be shown:
Profile Status Set the initialization of IPSec Tunnel with this profile settings.
Enable – Choose this one to invoke this profile manually. In
addition to select Enable, you have to click Initiate under the
page of VPN-IPSec Tunnel-Policy Table.
Always On – Choose this one to invoke this profile
automatically by the system for every 30 seconds.
Disable – Choose this one to inactivate this profile.
Name The name for VPN connection (ex. “VPN1”). The maximum
length of name is 20 characters including spaces.
Authentication The authentication to be used by PreShared Key or RSA
Signature.
PreShared Key The shared key for peer identification. The maximum length is
40 characters, including spaces.