Filter
Top Products
9
Before you use the CE5.0…
1. Get the device and Boot loader ready
For using the F/W of CE5.0, You must update the Boot loader for CE5.0 to ensure all of the devices and function normally.
2. The differences between CE4.2 and CE5.0
z Two user interface styles supported
a. The CE5.0 support two user’s modes, WBT mode and Desktop mode, Users can switch from one to
another in Control Panel.
z More device drivers have been supported in CE5.0
a. The CE5.0 F/W with CE5.0 Boot loader support Card Bus (WiFi, PB.).
b. The CE5.0 OS support Card Bus (32 bits/backward compatibility), 802.11g (Driver required),
USB2.0 (CLE only), RTL8169 (Giga bit), RTL8180 (WiFi/PCI), L2TP/PPPoE.
z More complete and friendly user interface have been supported in CE5.0
a. The new function L2TP and PPPoE have been supported in RAS in the Connection Manager.
b. Regional and Language Setting support the Regional setting in the program format, Number,
Currency, Time and Date; and also support the Input Language to select which keyboard layout
You want to use.
c. The new function Terminal License have been supported in Control Panel, and the user can view and
reset the terminal license there instead of reset it in Application Properties.
d. The new function Touch Panel Settings have been supported in Control Panel, and the user can set
the touch panel model and alignment the panel there instead of do it in Application Properties.
z The RDP version is upgraded from RDP 5.2 to RDP 5.5
z Complete update from CE4.2 to CE5.0
a. The CE4.2 OS could be upgraded to CE5.0 by using FTP Update.
BOSSTX2 CE 5.0 User's Manual