Filter
Top Products
73
b. Make the desired changes.
c.Click OK to save your changes.
6.3.15.3 Sever Location
This section explains how to:
a. Set the protocol the ICA clients uses
b. Control the way in which the ICA client locates Citrix servers
c. Configure a list of Citrix servers for Business Recovery
The network protocol settings allow you to control the way the ICA client searches for Citrix server and how it communicates
with them. Server location (also called server browsing) provides a method for a user at a network-connected ICA Client to
view a list of all Citrix servers on the network that have ICA connections configured, and a list of all published applications.
The way in which server location works depends on which network protocol has been configured:
9 TCP/IP – The client uses the UDP protocol to search for Citrix servers. The client communicates with the Citrix server
using ICA protocol over TCP/IP. This is the default protocol.
9 TCP/IP + HTTP – The client uses the HTTP protocol to locate Citrix servers. The client communicates with the Citrix
server using ICA protocol over TCP/IP. Select this option when using the ICA Client over the Internet or via a firewall
or proxy server.
9 SSL + HTTPS – The client uses the HTTPS protocol to search for a list of Citrix servers. The client communicates with
the Citrix server using ICA with SSL. SSL+HTTPS provides strong encryption of ICA traffic and Citrix server
authentication. Select this option when using the ICA Client over the Internet or via a firewall or proxy server.
The TCP/IP+HTTP and SSL+HTTPS protocols can only be used with compatible Citrix servers. Check the Citrix
server administrator’s guide for further information.
When the CTP/IP or TCP/IP+HTTP protocols are selected, the ICA protocol can be encrypted using SecureICA.
Business recovery provides consistent connections to published applications in the event of a master ICA Browser server
disruption. You can define up to three groups of Citrix servers to which you want to connect: a primary and two backups.
Each group can contain from one to five servers.
When you build a new ICA connection, the ICA client in this WBT will automatically search for any Citrix server on the
network. The default setting is TCP browser but you can make desired change at this page. It depends on what kind of
protocol of your Citrix server. If you can’t find by this protocol, scroll through the list and try other protocols. This will change
the default protocol setting of ICA client when searching for Citrix server location.
Note
Note
BOSSTX2 CE 5.0 User's Manual