Filter
Top Products
68
6.3.14.2 Add a remote printer
To add a remote printer, insert a block similar to the following in the /etc/printcap file.
For Example
: Use the SCO UNIX x86
MyPrinter:\
:lp=:\
:rm=:MyPrinter:\
:rp=:MyPrinter:\:
sd=/usr/spool/lpd/MyPrinter:\
:mx#0:
Note: MyPrinter maybe define in director as below
/etc/hosts
192.168.0.95 MyPrinter. MyPrinter.DOMAIN.com
e.g.
If it works on a BSD UNIX host and makes the directory /usr/ spool/ETPS1
available, then follow these three procedures:
chown daemon /usr/spool/MyPrinter
chmod 775 /usr/spool/MyPrinter
chgrp daemon /usr/spool/MyPrinter
For Example
:
User can setup a printer name and execute a printing instruction using configure tool under the X-Window as below figures.
1.Preform the printer configuration under KDE in Redhat 7.3 O.S. Then click “New” button.
2.On the following screen user will be ask to provide information for adding a new Printer Queue.
Click “Next” to process.
3.In this “Set the Printer Queue Name and Type” page.
BOSSTX2 CE 5.0 User's Manual