Filter
Top Products
29
If your WBT is not on the same network as the Citrix server you would like to connect to, the server name will not appear in
the list (this would occur if you are on the other side of a router, across the Internet, or using RAS to connect to a remote
network containing Citrix servers). In this case, click Server Location and go to section 4.5.1.5. Otherwise, scroll through the
list and select the Citrix server or published application or type the name of the Citrix server or published application in the
edit field. Click Next to continue, and go to section 4.5.1.5.
4.5.1.4 The Server Location dialog box appears:
Remote Application Manager uses the information entered in the Server Location screen to help locate available Citrix
servers and published applications.
The default server location protocol is TCP Browser and the default value entered in the Address field is Auto-Locate.
Click Add and enter the IP address or DNS name of any Citrix server on the remote network. Click OK, then click Next to
section 4.5.1.5. The following figures show the sequence of settings.
BOSSTX2 CE 5.0 User's Manual