Filter
Top Products
52
6.2 Display Configuration
The Display properties sheet lets you configure the terminal's display screen. Invoke this properties sheet by clicking on the
Display tab in the Terminal Properties dialog box. The following figure shows the properties sheet.
You can also Test
your display after selecting one Refresh Frequency, the new testing mode will appear. The graphics adapter will
be set to the new mode temporarily for about 5 seconds so you can determine whether your display works
properly.
Display Properties Sheet
6.2.1 Enable Screen Saver
Tick the “Enable Screen Saver” and you can configure your desired way to enable the screen saver for this WBT. There are
three options to choose: Screen Saver, Turn Off Monitor and Turn Off WBT. You can leave this WBT to activate the function
automatically according to the time you set. Or you can tick “Enable Ctrl + Alt + L Turn ON/OFF screen saver” to manually
activate/deactivate any one of the left three energy savers you tick by pressing the hot-keys of “Ctrl+Alt+L”.
There is still one hidden option of “Enable Property Password” to gain more security protection. To have this option available
you have to click “Control Panel” tab and double click on Security tab. Please refer to the description
mentioned earlier in section 6.5.11.
BOSSTX2 CE 5.0 User's Manual