Filter
Top Products
44
The Make New PPP over Ethernet Connection dialog should now appear. Type in the Host name or IP address you wish to
connect to. Then click on “TCP
/IP Setting” .The TCP/IP Setting is the same as stated in the Make New Dial-Up Connection
above. After all done, click on “Finish” to go back to the Configure entry of Terminal Connection Manager.
4.6.4.2 To start a PPP over Ethernet Connection
In Connections entry of Terminal Connection Manager select the RAS connection you would like to connect to. The target
and host should now be connected. You should see connection icons in the status bars of your host and target. Once the
PPP over Ethernet Connection is connected successfully, then press the Hot-keys “Ctrl +Alt + End “ to back to the
“Terminal Connection Manager ”and double click on RDP or ICA for connection.
4.7 Microsoft Internet Explorer Connection
This is an optional function for your WBT; check your vender for this support before your purchase. This local browser
connection will require more RAM utilization and powerful CPU to have better performance. This WBT is equipped with a
CPU of outstanding speed to offer you a local browser session you never experience before.
4.7.1 To Make a New Microsoft Internet Explorer Connection
To make a new connection follow the below steps: In Connection Manager dialog box click on Configure tab, click on Add
to add a new connection, scroll through the list in the box, choose Microsoft Internet Explorer. Then click on OK to
continue.
BOSSTX2 CE 5.0 User's Manual