Filter
Top Products
74
6.3.15.4 Firewall Settings
This is to configure a default SOCKS proxy server, if you would like to configure a SOCKS proxy server for a specific ICA
connection entry, please refer to the description mentioned earlier in section 4.5.3.
To Configure a Default SOCKS Proxy Server
a. Tick Connect via SOCKS proxy.
b. In the Address of proxy to use box, enter the SOCKS proxy server’s IP address.
c. In the Port box, enter the proxy server's port number (if different than 1080).
d. Click OK to save your changes.
If you configure a default SOCKS proxy server, you must specify at least one server in the Server Location tab for
server and published application browsing to work.
Configuring Alternate Address Translation
If the ICA Client is outside a firewall that uses address re-mapping, you must configure the ICA Client to use the alternate
address returned by the master ICA Browser. This is necessary even if you are not using a SOCKS proxy server.
You must also use the ALTADDR utility to manually set the alternate address for each Citrix server, See the
Command Reference appendix of either the MetaFrame Administrator’s Guide or the W
INFRAME System Guide for more
information.
If you set alternate address translation for all connection entries, it cannot be disabled for specific connection entries.
To Use Alternate Address Translation for All Connection Entries
a. Press F2 to enter the Terminal Properties page, click Apps tab and then click Global ICA Client Settings icon.
b. Click the Firewall Settings tab.
c. Click Use alternate address for firewall connection.
d. Click OK to save your changes.
Note
Note
Note
BOSSTX2 CE 5.0 User's Manual