Filter
Top Products
Running Tests
Follow
these steps to run a test from
the Execute menu:
1.
Press
It)
or m to select Execute. You see the Execute
menu, such as the following:
System Board
Numeric Coprocessor
System Memory
Diskette Drive A
Hard Disk Drive #l
Serial Port COMl
Serial Port COM2
Parallel Port LPTl
LPTl Printer Test
2.
Press
m
or
m
to highlight the device you
want to test
and
press m. You seethe Repeat prompt:
How often to repeat test?
1
3.
If you
want to run
the test once, press
IEnter
To
run
the test
more than once, type the number of times you want to run
it and press IEnter
4.
If there is only one test for a device, the program begins
testing immediately. If there is more than one test for the
device, you see a submenu of test selections, such as the
following:
HARD DISK DRIVE(S) AND CONTROLLER
CHECK MEND
1
- Seek check
2
- Write,
read check
3
- Read, verify check
4 - Run all above checks
0
- Exit
Running System Diagnostics A-S