Filter
Top Products
Connecting Peripheral Devices
You may not want to connect all your peripheral devices before
you run the System Configuration program for the first time. If
you’ll be installing ISA cards after running the program, you
may want to connect only those devices necessary to perform
the program’s functions. If you connect other devices, you will
need to disconnect them to install the ISA cards.
You must connect a monitor and a keyboard to run the System
Configuration program. You may also want to connect a
printer.
As you set up your computer, leave this manual’s back cover
foldout open so you can refer to the illustrations identifying the
different parts of the computer.
The following icons mark the built-in interfaces on the back of
the computer:
Caution
Although the keyboard and mouse ports are physically
identical, you cannot use them interchangeably. Be sure to
plug the keyboard and the mouse into the correct ports.
Before connecting your peripheral devices, make sure the
power buttons or switches on the computer and all the
peripheral devices are turned off.
Setting Up Your System
1-5