Epson EPL-5500W All in One Printer User Manual


 
3.1 GENERAL INFORMATION
This chapter describes disassembly/assembly procedures to use to replace the main assemblies of the
EPL-5500W.
3.1.1 Precautions for Disassembly/Assembly
Follow the precautions below when disassembling/assembling the printer.
Disconnect the power cord before disassembling/assembling the printer.
Be sure to handle the fusing unit carefully, because the unit remains hot for a while after
the printer stops printing.
If it is necessary to plug in the power cord and operate the printer after disassembling it,
please be careful of the following:
1.Keep your hands and clothing well away from operating or rotating parts (such as
rollers, fan motors, etc.).
2.Never touch electric terminals or high-voltage components (such as the charger and the
high-voltage unit).
Do not disassemble the photoconductor unit and toner cartridge.
If the photoconductor unit is removed from the printer, do not place it in direct sunlight.
Do not disassemble the optical unit.
Never turn power on if the optical unit is not installed.
To prevent damage to ICs from static electricity, do not touch the ICs on the circuit
board or the terminals of peripheral electrical components with your hands.
Use only the recommended tools to ensure safe and efficient maintenance work.
Inappropriate tools may damage the machine.
Never open the upper unit until the main motor stops completely. Otherwise, the gears
may be damaged.
When transporting the printer, remove the photoconductor unit and toner cartridge from
the printer.
When transporting the printer a long distance, pack up the printer using the original
packing material.
3.1.2 Tools
Use the tools listed in Table 3-1 for disassembling/assembling the printer and for troubleshooting.
Table 3-1. Tools
Name Commercially Available? Part No.
Philips screwdriver no. 2 Yes B743800200
Regular screwdriver Yes B743000100
Tweezers Yes B641000100
Soldering iron Yes B740200100
Round-nose pliers Yes B740400100
EPL-5500W Service Manual Disassembly and Assembly
Rev. A 3-1