Filter
Top Products
3.2.2 Removal of the Controller Section
The control section is comprised of the controller board (the C180 MAIN board).
3.2.1.1 Main Board (C180 MAIN Board) Removal
1. Turn the printer so that its right side faces you.
2. Remove the right cover.
3. Remove 2 screws, and then remove the shield case.
4. Disconnect all connectors on the C180 MAIN board.
5. Remove the 5 screws for the C180 MAIN board.
6. Remove the C180 MAIN board.
Figure 3-2. Removing the Shield Case
Figure 3-3. Removing the C180 MAIN Board
EPL-5500W Service Manual Disassembly and Assembly
Rev. A 3-5