Filter
Top Products
3.2.3.5 Power Supply Unit (PWB-E) Removal
1. Remove the upper unit. (Refer to Section 3.2.3.3.)
2. Remove 6 screws, and remove the PWB-E cover.
3. Disconnect connector CN207 from the C180 MAIN board.
4. Remove 4 screws and 2 screws, and then remove the PWB-E.
Figure 3-13. Removing the PWB-E Cover
Figure 3-14. Removing the PWB-E
EPL-5500W Service Manual Disassembly and Assembly
Rev. A 3-11