Epson EMP-7100 Projector User Manual


 
7
When replacing batteries, take the following precautions:
Do not mix old and new batteries.
Do not recharge used batteries or expose batteries to fire or water.
Replace batteries as soon as they run out. If the batteries leak,
wipe away the fluid with a soft cloth. If battery fluid gets onto
your hands wash them immediately.
Remove the batteries if you will not be using the projector for a
long period.
Connecting to a Computer
You can connect the projector to a computer capable of SVGA, VGA,
SXGA and XGA (EMP-7100), SVGA, VGA and XGA (EMP-5100)
output. Resizing is supported for VGA, SVGA and SXGA (EMP-7100),
VGA and XGA (EMP-5100) output. Below a list may be found of the
types of computers supported by this projector.
IBM desktop PC or compatible
IBM laptop or compatible
Apple Macintosh desktop computer, including Macintosh
Quadra
®
, Macintosh Centris
®
, and Power Macintosh
Any Apple PowerBook with video-out capability, including all
160, 165, 180 and 500 series PowerBooks
Connecting to a Computer