Filter
Top Products
28 2 • Using the Projector
Operation Panel
Button/controller Function
Power Turns power on and off.
Menu Displays or closes the menu.
Video Switches from computer to video.
Computer Switches between Computer 1 and Computer 2,
and from video to computer.
Auto Automatically adjusts the graphic signal being
sent from a computer to optimize it for projection.
Resize Switches the display dot mode and resize mode
(EMP-7100 : for VGA, SVGA and SXGA input
EMP-5100 : for VGA and XGA input).
Volume ± Adjusts the volume level.
Mute Cuts off audio.
<Up>/<Down>(Sync+/Sync–)
Synchronizes the graphic signal being sent from a
computer.
Use these buttons to make adjustments whenever
the overall image is fuzzy or streaked.
These buttons are also used during menu
operations to select menu items.
<Left>/<Right>(tracking–/tracking+)
Matches the projector’s internal clock to various
computer graphic signals (tracking adjustment).
Use these buttons to make adjustments whenever
there are vertical fuzzy lines in the image.
These buttons are also used during menu
operations to change numeric settings.
(Enter) key Registers a menu selection.