Filter
Top Products
81
The following describes some common problems and what you
should do when you encounter them.
❚ The operation indicator does not light up.
Check the power supply, making sure that the power cable is securely
connected to the projector and the power outlet.
Check to ensure that the projector lamp cover is securely closed.
❚ The projector lamp does not light up.
The lamp is burned out and needs to be replaced.
❚ The operation indicator is red.
The projector is overheated. The projector lamp will also turn off
automatically at this time. Wait until the projector cools off before
you try turning it back on.
Check the air vents on the bottom and back of the projector to make
sure they are not blocked. If they are, use the procedure described on
page 75 to clean the filters.
If the projector continues to overheat after you clean the filters, you
may have to request servicing for the cooling fan or internal circuitry.
Contact your nearest service provider.
❚ The operation indicator is flashing red.
There is a problem with the projector’s internal circuitry that requires
servicing. Contact your nearest service provider.
❚ The projection lamp indicator is red.
The projection lamp has reached the end of its life and needs to be
replaced.
Problems with the Projector