Epson EMP-7100 Projector User Manual


 
37
If you change your mind, select No and then press a Click button or
the <Enter> button to clear the confirmation screen without chang-
ing any settings.
Video Menu (Video)
The Video Menu allows you to make adjustments related to video
signals from video equipment.
BRIGHTNESS
Lightens or darkens the overall image. Increase brightness to make
the image lighter, or decrease it to make the image darker.
CONTRAST
Adjusts the relative difference between light and dark areas. Increase
contrast to make light areas lighter and dark areas darker, or decrease
it to lessen the difference between the light areas and dark areas of
the image.
SATURATION
Adjusts color density. Increase color density to make colors darker
and more opaque, or decrease it to make colors lighter and less
opaque.
TINT (NTSC only)
Adjust the red-green balance of the screen. Increase tint to add more
green, or decrease it to add more red.
MODE
Specifies the video signal system. Normally this signal system setting
should be left at AUTO for automatic detection of the video signal
system. If automatic selection is not possible for some reason, use this
menu to manually specify NTSC, PAL or SECAM .
Changing Menu Settings