Filter
Top Products
26
Playing Sound from Video Equipment
The projector has a built-in speaker with a maximum output of 5 W. You can
output sound from connected video equipment (such as a computer or video
deck) through the projector's built-in speaker if the video equipment has an
audio output port.
The [Audio] port to use is the port that is in the same box as the port being
used to input the video signals. sp.9
Select the audio cable that is used for this connection from the following,
depending on the shape of the other equipment's port.
• If connecting to a stereo mini jack (such as the audio output port of a
computer): Use a commercially-available stereo mini jack audio cable to
make the connection.
• If connecting to an RCA pin jack ×2 (red/white) (such as the audio output
port of video equipment): Use the audio adapter that is supplied with the
projector and a commercially-available A/V cable to make the connection.
If the image signals are being input to the [Computer1/Component
Video1] port
If the video signals are being input to the [Video] port
TIP
•You can adjust the volume after projection has started. sp.44
•If using a commercially-available 2RCA (L/R)/stereo mini-jack
audio cable, use one that is marked as "No resistance".
To audio output port
To [Audio1] port
Stereo mini jack audio cable
(commercially-available)
To audio output port
To [Audio] port
Audio adapter
(accessory)
A/V cable
(commercially-available)