Filter
Top Products
63
Using the Configuration Menu Functions
* EMP Monitor : Allows you to monitor multiple projectors on
the network and control them all at once using functions
such as turning the power on and off and switching input
sources.
To use the EMP Monitor, an adapter and cable for conversion
are required. The followings are available products.
(As of May, 2004)
For details on the products, visit LANTRONIX's website.
Adapters:
UDS100, UDS200 (LANTRONIX)
Cables:
For the UDS100
RS-232C cable (straight, mini D-Sub9pin female/mini
D-Sub25pin male)
For the UDS200
RS-232C cable (cross, mini D-Sub9pin female/mini
D-Sub9pin female)
For the detailed and current information about the software,
please visit the following website.
http://www.epson.co.uk/support/download/
Sub-menu Function Default
Standby
Mode
Set to "Network ON" to use network monitoring and control
functions and the standby monitor out function while the
projector is in standby mode.
If you change the setting, the new setting will be enabled
after the power is turned off.
•We provide softwares* for network monitoring and
controlling projectors.
•When set to "Network ON", the Power indicator will flash
orange and then remain orange after disconnecting the
power plug and reinserting it into the electrical outlet.
Network OFF
COM Port This can be set to either "RS-232C" or "USB", depending on
the port that is being used for communication with a
computer.
If you change the setting, the new setting will be enabled
after the power is turned off.
RS-232C
Language Sets the language for message displays.
•Press the [Enter] button on the remote control or on the
projector's control panel and then make the selection.
English
(Varies
depending on
country of
purchase)
Reset Returns "Display" and "Operation" settings in the
"Extended" menu to their default settings.
However, if "Background Color" has been set to "Logo" or if
"Startup Screen" has been set to "OFF", the settings will not
be returned to their defaults if "User’s Logo Protect" is set to
"ON". sp.29
•Press the [Enter] button on the remote control or on the
projector's control panel.
•To return all settings such as the "Image" and "Signal"
menu settings to their default values, select "Reset All"
from the "Reset" menu.
sp.65
-