Epson 821 Projector User Manual


 
93
Optional Accessories and Consumables
The following optional accessories are available for purchase if required. This list of optional accessories is current as of June, 2004. Details of accessories are
subject to change without notice.
* A special method of installation is required in order to suspend the
projector from the ceiling. Please contact your dealer if you would like
to use this installation method.
Optional Accessories
Soft carrying case ELPKS27
Use this case if you need to carry the projector by hand.
60" screen ELPSC07
80" screen ELPSC08
100" screen ELPSC10
A portable roll-type screen. (Aspect ratiog 4:3)
50" portable screen ELPSC06
A compact screen which can be carried easily. (Aspect ratio 4:3)
VGA-HD15 PC cable ELPKC02
(1.8 m (6 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
This is the same computer cable as the projector's accessory computer
cable.
VGA-HD15 PC cable ELPKC09
(3 m (9.8 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
VGA-HD15 PC cable ELPKC10
(20 m (65.6 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
Use this extension cable if the accessory computer cable is too short.
Component video cable ELPKC19
(3 m (9.8 ft.) - for mini D-Sub 15-pin/RCA male
×
3)
Component video cable ELPKC27
(0.35 m (1.15 ft.) - for mini D-Sub 15-pin/RCA female
×
3)
Use to connect a component video
g source.
Ceiling mount * ELPMB07
Use when installing the projector to a ceiling.
Ceiling plate* ELPFC03
Pipe 370 (370 mm (14.57 in.)/silver)* ELPFP04
Pipe 570 (570 mm (22.44 in.)/silver)* ELPFP05
Pipe 770 (770 mm (30.31 in.)/silver)* ELPFP06
Use when installing the projector on a high ceiling or a ceiling with
veneer panels.
Image presentation camera ELPDC04
Use to project books, OHP films and slides.
Consumables
Spare lamp ELPLP30
Use as a replacement for used lamps.
Filter kit ELPAF06
(2 air filters)
Use as a replacement for used air filters.