Filter
Top Products
62
Using the Configuration Menu Functions
Projection Sets the projection position for the projector.
• Front : Select when the projector is in front of the
screen.
• Front/Ceiling: Select when the projector is in front of the
screen and suspended from the ceiling.
• Rear : Select when the projector is behind the
screen.
• Rear/Ceiling : Select when the projector is behind the
screen and suspended from the ceiling.
Front
Operation This lets you make settings related to projector operation.
Direct Power ON:
When the projector's power cable is connected, projection
starts without needing to press the [Power] button.
* When "Direct Power ON" is set to "ON", turn the power
off by pressing the [Power] button, then wait for the cool-
downg period to finish and then disconnect the power
cable. If the power cable is left connected to the wall
outlet when "Direct Power ON" is set to "ON", the
projector will turn on if a power outage occurs and then
the power is restored.
Sleep Mode:
Sets the energy saving operation when no signal is being
input.
• When set to "ON", projection stops automatically and
then after the cool-downg period is finished, the
projector changes to sleep mode if no operations are
carried out for 30 minutes while the "No Signal."
message is being displayed. (The Power indicator lights
orange.)
• Projection starts again when the [Power] button is
pressed.
Direct Power
ON: OFF
Sleep Mode:
OFF
Sub-menu Function Default