Filter
Top Products
36
Adjusting the Screen Image
These functions correct and adjust the projected images so that optimum
images can be obtained.
Adjusting the Image Size (Zoom Function)
The size of the projected image is basically determined by the distance
from the projector to the screen. sp.16
The following procedures explain how to adjust the screen image once the
projector itself has been set up.
PROCEDURE
Adjust by turning the zoom ring.
The maximum zoom ratio of the EMP-821 is × 1.6, and that of the
EMP-81/61 is × 1.2.
If you would like to enlarge the image further, move the projector
further away from the screen. sp.16
Focusing the Screen Image
PROCEDURE
Turn the focus ring to adjust the image focus.
If keystone correction or Sharpness settings have been made, it may
not be possible to adjust the focus correctly.
TIP
The E-Zoom function lets you enlarge parts of the image. sp.48
Turn to "W" (wide) to
enlarge the images.
Zoom ring
Turn to "T" (tele) to
reduce the images.
Focus ring
TIP
•If the surface of the lens is dirty or misted over as a result of
condensation, it may not be possible to adjust the focus correctly.
If this happens, clean or de-mist the lens. sp.77, p.84
•If the distance from the lens to the screen is not within the
recommended distance, it is impossible to bring the lens into focus.
If you have trouble obtaining the correct focus, check the
projection distance.
s
p.16