Filter
Top Products
Setting Up the Projector
21
Connecting to External Speakers or a PA
System
The projector’s speaker is loud enough for most small- or medium-size
rooms. For large rooms or maximum volume, you can connect the
projector to external speakers or a public address (PA) system.
You’ll need an RCA-to-3.5 mm stereo audio cable, which may be
included with your sound system or may be purchased from an
electronics store.
Before you start, make sure the projector and speakers or PA system
are turned off.
1. Connect the cable’s 3.5 mm stereo miniplug to the projector’s
Audio Out
jack.
2. Connect the RCA plugs to the speaker or PA system. Insert the
cable’s red plug into the Audio R jack and the white plug into the
Audio L jack.
note
The projector’s internal
speaker is disabled when you
use an external audio system.