Filter
Top Products
Replacing an Ink Cartridge 51
If the pattern has white lines or gaps (as shown below), click
Clean to clean
the print head again.
If you don’t see any improvement after cleaning three or four times, refer to
“Problems and Solutions” on page 64.
You can also turn the printer off and wait overnight—this allows any dried ink
to soften—and then try cleaning the print head again.
Replacing an Ink Cartridge
When the red H ink light flashes, one or more ink cartridges are low on ink.
When the red H ink light stays on, you need to replace the cartridge(s).
When you print, you’ll also see a message on your screen telling you which
cartridge is low or empty.
When a cartridge is more than six months old, you may need to replace it if
printouts don’t look their best. If the quality doesn’t improve after cleaning and
aligning the print head, you can replace the cartridge even if the red H ink light is
off.
Ink light