Filter
Top Products
1-12 Installation
Confidential
3. Attach the power supply box to the rear of the printer, aligning the box inside the rubber
pads and secure with two screws packed with the printer (C.P.T-B Screw, 3 × 14, F/Ni).
Horizontal Installation and Wall Mounting
1. Check that the printer POWER switch is off and that the power supply cord of the AC
adapter is not plugged into the wall outlet.
2. Connect DC power supply cable of the AC adapter to the DC connector on the printer.
Screws
Rubber pads
Holes 1
Holes 2