Filter
Top Products
3-4 Compatibility
Confidential
For the TM-U210 series printers, when DIP switch 1-2 is off, the following commands cannot be
used; however the TM-U230 can use them.
Receive buffer full conditions are different.
Mounted Mechanism
Page 254, 255 (Space Page)
There is difference in a memory mapping.
Printer Name
HT
Horizontal tab
ESC %
Select/cancel user-defined character set
ESC &
Define user-defined characters
ESC ?
Cancel user-defined characters
ESC D
Set horizontal tab positions
FS 2
Define user-defined Kanji characters (only for Multilingual specification)
FS ?
Cancel user-defined Kanji characters (only for Multilingual specification)
Printer Receive buffer-full conditions
TM-U230 When the remaining memory size becomes 128 bytes, the printer will be BUSY
and when it returns to 256 bytes, the BUSY condition will be canceled.
TM-U210 series When the remaining memory size becomes 16 bytes, the printer will be BUSY
and when it returns to 26 bytes, the BUSY condition will be canceled.
Printer Mounted Mechanism
TM-U230 Autocutter and near-end sensor are standard equipment
Has no paper roll take-up device
TM-U210 series Near-end sensor is an option
Available with or without an autocutter
Available with or without a paper roll take-up device
Printer Memory Mapping
TM-U230 Page 254 7
×
9 font First address ECBA0
9
×
9 font First address ED5A0
Page 255 7
×
9 font First address EE1A0
9
×
9 font First address EEBA0
TM-U210 series Page 254 7
×
9 font First address 8CBA0
9
×
9 font First address 8D5A0
Page 255 7
×
9 font First address 8E1A0
9
×
9 font First address 8EBA0