Filter
Top Products
Installation 1-1
TM-U230 Developer’s Guide
Confidential
Chapter 1
Installation
Installation and Positioning of TM-U230
Precautions in Handling the Fine Coating Case
(only for Fine Coating Case model)
This printer is housed in a plastic case (*) with a fine coating; simple cleaning is enough to enable
dirt to come off easily so that the exterior of the printer remains in good condition. Like plastic
cases, handle the fine coating with care as described below.
(*)Fine coating is not applied to the installation surface of the metal plate, the power supply box
and the inside of the case.
• Do not scratch the surface with hard objects; otherwise the case may become damaged
and dirt may become difficult to remove.
• Do not use any type of abrasive agent (glass, metal, ceramic, etc.) to clean the case;
otherwise the surface of the case may become damaged and dirt may become difficult to
remove.
• Never clean the case with disinfectant, bleach, alcohol, benzene, thinner, chlorine, or
ketone; otherwise the dirt may become difficult to remove. Also, they may cause the case
to become discolored, dissolved, or deformed.
• Label may come off of the fine coating of the case.
Selecting a Place of Installation
This printer can be installed vertically (standard installation) so that the paper exit faces the
front or horizontally so that the paper exit faces upwards. With the optional wall mounting
bracket (Model No: WH-10) the printer can be wall-mounted.
Note:
Since vibrations are generated during paper cutting, take suitable measures to secure the printer.
❏ Installation on a table (vertical or horizontal installation)
• Regardless of installation method chosen, the tilt of surface selected must be 15° or less.
• Attach the supplied switch panel sheet for horizontal installation when the printer is to
be installed horizontally.
• Adjust the N.E detector and attach the rubber feet as required by the chosen method of
installation.
Environment Specifications
See the Environment Specifications section in Appendix A.