Filter
Top Products
Using the Printer
2-15
2
Removing a printed document from the push
tractor
Follow these steps to remove the printed document:
1. Make sure the Tear Off (Pitch/Font) lights are flashing.
Note:
If they are not flashing, you may need to set the Tear Off setting on
as a default. See “Changing default settings” on page 2-9 to change
the default setting.
2. Open the paper guide cover, then tear off the printed
document using the tear-off edge of the paper tension unit.
Note:
If your paper’s perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the Micro Adjust
feature. See “Adjusting the tear-off position” on page 2-25.
c
Caution:
Never use the paper-feed knob to adjust the tear-off position;
this may damage the printer or cause it to lose the tear-off
position.