Filter
Top Products
MLC 104 IP Plus • Hardware Setup
Hardware Setup
MLC 104 IP Plus
2-12
3
Chapter Three
MLC 104 IP Plus Software Setup
Step 1: Download Device Drivers
Step 2: Create a New Project
Step 3: Add an MLC 104 IP Plus Controller and Define its Location
Step 4: Define E-mail Settings
Step 5: Add a Serial and an IR Device
Step 6: Configure the Front Panel Buttons
Step 7: Configure the Control Modules Using the Auto Fill Feature
Step 8: Create a Display Shutdown Schedule
Step 9: Create a Display Lamp Hour Warning E-mail
Step 10: Create a Display Disconnection E-mail
Step 11: Build and Upload a Configuration