Filter
Top Products
Fine-tuning the Projector 39
Changing Menu Settings
Use the buttons on the remote control to access the menus and change
settings. Follow these steps:
1. To display the menu screen, press the
Menu button on the
remote control. You see the menu screen:
The seven menus are listed on the left, and the options available
for the highlighted menu are shown on the right.
2. Press up or down on the directional buttons to scroll through the
menu list.
3. When the menu you want is highlighted, press the
Enter button
to select it. The highlight moves to the first option for that menu.
4. Use the directional buttons to scroll through the list of options.
(If a computer or video source isn’t connected, certain options
may be unavailable.)
5. Use the directional buttons and
Enter button to change the
setting for the selected option. Enabled settings are highlighted.
6. Press the
Esc button to return to the main menu. Your changes
are saved automatically.
7. Press
Esc again (or the Menu button) to exit the menu system.
Menu
A/V Mute
E-Zoom
Freeze
S-Video/Video
Color Mode
Computer
Page upPage down
Power
ESCAuto
Enter
Menu Directional buttons
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Color Mode
Color Mode
Position
Tracking
Sync .
Brightness
Contrast
Sharpness
:
:
:
:
:
Select
Adjust
0000
0
0
0
0
0
+
-
+
-
0
0
+
-
[Normal ]
[Normal ]
:
:
Input Signal
Auto Setup
Reset
Execute
ON OFF
:
:
Select
[Computer
]
[ ]: Enter[ ]: Select [Menu]: Exit
Menus
Menu options
note
If you want to go back to the
default settings on any menu,
select Reset, press Enter,
select Yes, and then press
Enter.