Filter
Top Products
58 Maintaining and Transporting the Projector
Resetting the Lamp Timer
You must reset the lamp timer after replacing the lamp to clear the
LAMP REPLACE warning message. Follow the directions below to
reset the lamp timer:
1. Turn on the projector.
2. Press the
Menu button on the remote control. You see the main
menu.
3. Use the directional buttons to highlight
About, then press the
Enter button. You see the following:
4. Press
Enter to select the Reset Lamp Timer option. You see the
following:
5. Use the directional buttons to select
YES and press Enter.
6. Press
Esc to return to the main menu.
7. Press
Esc again (or the Menu button) to exit the menu system.
Frequency
Video Source
V ---.--Hz
V ---.--Hz
Reset Lamp Timer
H ---.--kHz
Lamp 1400H
SYNC Mode
SYNC Polarity
------
H ------
Resolution
Refresh Rate 0.0 Hz
0.0 Hz
0x 0
Computer
Input Signal RGB
Execute
:
:
:
:
:
:
V ------
:
:
:
:
:
Reset Lamp Timer
Execute?
YES
NO
NO
Reset Lamp Timer
Execute?
YES
NO
NO