Filter
Top Products
68 Fine-tuning the Projector
7. When you see this screen, select a zoom rate (display size), and
then press
Enter.
8. When you see the message
Save image as user’s logo?, select
Yes and press Enter. Saving the logo takes a few moments. Do
not use the projector or other sources (computer, video, etc.)
while the logo is being saved.
9. When you see the message
Completed, press Esc.
10. To display the logo as the background screen when the
A/V Mute
button is pressed, select the
Extended menu and press Enter.
11. Select
Display and press Enter.
12. Select Display
Background and press Enter. Then select Logo
and press
Enter.
13. When you’re finished, press
Menu to exit the menus.
Setting a Password
1. Press the Freeze button on the remote control for about 7 seconds
until you see the Password Protect menu:
note
The default setting for the
Startup Screen option
menu is
ON. If the Startup
Screen
is set to OFF, the
logo will not display at
startup.
If the User’s Logo Protect
function has been set to
ON,
the
Display Background
setting cannot be changed.
You need to turn the protect
function off first. See
page 69 for details.
Once you’ve saved a user’s
logo, you cannot reset the
logo setting to its factory
default (no logo).
note
If a password has already
been set, you see the
Password Protect Release
screen. See “Starting the
Projector with a Password”
on page 70.