Filter
Top Products
111
Maintaining and Transporting the Printer | 111
Installing the New Black Ink Cartridge
1. When draining is complete, RAISE THE LEFT INK LEVER appears on
the LCD. Raise the ink lever on the left ink compartment.
2. When
REMOVE CNVRSION CRTG appears, remove the conversion
cartridges from the slots on the left ink compartment.
3. When
INSERT INK CRTG appears, insert the cartridges in their
specified slots.
4. When
LOWER BOTH INK LEVERS appears, lower the ink levers on the
right and left ink compartments.
5. When
RAISE BOTH INK LEVERS appears, raise the ink lever on the
right and left ink compartments.
The printer starts charging ink. After a while, ink lever messages appear
on the LCD.
6. When a message appears on the LCD, raise or lower the ink levers
accordingly.
7. When
READY appears on the LCD, ink charging is complete.
8. If you have installed 110 ml ink cartridges, close the ink compartment
covers. If you have installed 220 ml ink cartridges, do not close the ink
compartment covers.
Note: Because ink
charging after black ink
conversion consumes a
large quantity of ink, you
may need to replace the
ink cartridges and
maintenance tank soon.