Epson pro4880gd Printer User Manual


 
64
64 | Printing with Epson Drivers for Macintosh
3. Select either of the following options:
Print Page Line prints trim lines on the right and bottom edges of
your pages.
Save Roll Paper saves paper by not feeding the blank portion of
the last page of your document. Available only when you’ve selected
Roll Paper (Banner) as the Paper Source.
Borderless Printing
For true borderless printing on roll paper, you can select either Auto
Expand
or Retain Size and create a custom paper size, as described in
“Choosing Page Setup Options” on page 54. Your image may be clipped on
the left and right edges, but you can minimize clipping by sizing your image
according to the page width and by adjusting the length.
For either setting, you should add 0.1 inch to the length of your custom size.
The Auto Expand setting provides the best solution for borderless printing
with minimal image clipping. Using this setting, you can create a custom
paper width equal to the width of the roll media. If you use the Retain Size
setting, you should create a custom paper width slightly wider than the
actual width of the media.
The following table shows recommended image widths (in inches) for
borderless printing using either the Auto Expand or Retain Size setting:
* Non-Epson roll media widths
Recommended image widths (in inches) for borderless printing
Roll
paper
width
Image width
(with Auto Expand)
Image width
(with Retain Size)
Custom Paper Size
(for Retain Size only)
8.3 8.06 8.35 8.3
10 9.7075 10.34 10.23
12* 11.8 12.34 12.23
14* 13.8 14.34 14.23
16 15.8 16.34 16.23
17 16.8 17.34 17.23
Note: These settings
override settings made
through the control panel.