Filter
Top Products
1-34
34 | Setting Up the Printer
6. If the firmware version of the file is newer, click Update to start the
firmware updating process. (If it is the same, you don’t need to update.)
7. When the update is complete, close the Firmware Updater window, LFP
Remote window, and the Printer Utility window.
To finish the installation, you need to load some cut-sheet paper and align
the print head, as described on page 107.
Caution: Don’t turn off
the printer while the
firmware is updating.
sp4800Guide.book Page 34 Tuesday, March 7, 2006 3:49 PM