Filter
Top Products
Connecting to a Projector on a Network and Projecting
14
Connecting to a Projector on a Network and Projecting
Operating the Projector
Before connecting, put the projector into connection standby status.
Make sure the projector network settings are complete, and the projector
is connected to network equipment such as a network hub via a
commercially available network cable.
Procedure
A Press the [t] button on the remote control to turn the power
on.
B Press the LAN button on the Remote Control.
The following LAN standby screen is displayed.
Operating the Computer
In the following explanations, unless otherwise noted, Windows screen
shots are used. You see the same screens even when using Macintosh.
Procedure
A Start EasyMP Network Projection.
For Windows
Select Start - Programs (or All Programs) - EPSON Projector -
EasyMP Network Projection.
For Macintosh
Double-click the Applications folder of the hard drive volume in
which EasyMP Network Projection is installed, and then dou-
ble-click the EasyMP Network Projection icon.
B The Connection mode screen opens, select "Advanced
Connection Mode" or "Quick Connection Mode" (only
available when the optional Wireless 802.11a/b/g Module is
installed). Then click "OK".
The projector search results are displayed.
To always connect using the mode you selected, select Set the se-
lected Connection Mode as the default mode for future connec-
tions. in the Connection mode screen.