Filter
Top Products
Changing Settings Using a Web Browser (Web Control)
48
Changing Settings Using a Web Browser (Web Control)
You can set up and control the projector from a computer by using the
Web browser of a computer that is connected to the projector via a
network. Setup and control operations can be performed remotely if this
function is used. In addition, since you can use the computer's keyboard,
entering characters required for setup is easier.
Use Microsoft Internet Explorer 6.0 or later as the Web browser. If using
a Macintosh, you can also use Safari. If, however, you are using Safari
under Mac OS X 10.2.8, some of the Web control radio buttons may not
be displayed properly.
q
If Communication On is set as the Standby Mode setting in the projector’s
Extended menu, setup and control with a Web browser are possible, even
when the projector is in standby mode (when the power is off).
Displaying Web Control
Use the following procedure to display Web Control.
q
If your Web browser is set up to connect via a proxy server, Web Control
cannot be displayed. To use Web Control, you need to make network
connection settings with a device other than a proxy server.
Entering the IP address of the projector
Web Control can be opened by specifying the IP address of the projector
as follows when using Advanced Connection Mode.
Procedure
A Start the Web browser on the computer.
B Enter the IP address of the projector in the address input box
of the Web browser, and press the [Enter] key on the
computer's keyboard.
Web Control is displayed.
When Web Control Password is set in the Network menu from the
projector's Configuration Menu, enter the Password.
Projector Setup
You can set items that are usually set in the projector's Configuration
Menu. The contents set are reflected in the Configuration Menu. There
are also items that can only be set in the Web browser.
Items in the Configuration menu that cannot be set by the
web browser
All items in the Configuration Menu can be set with the exception of the
following items.
• Signal Menu - DVI/HDMI Video Range
• Settings Menu - Keystone - Quick Corner
• Settings Menu - Pointer Shape
• Settings Menu - Test Pattern
• Settings Menu - User Button
• Extended Menu - registering User's Logo
• Extended Menu - Operation - BNC Sync Termination
• Extended Menu - Language
• Extended Menu - Operation - High Altitude Mode
• Extended Menu - Operation - Shutter Timer