Filter
Top Products
Using the Mail Notification Function to Report Problems
50
Using the Mail Notification Function to Report Problems
By setting the Mail Notification function from the projector's
Configuration Menu, notification messages will be sent to the preset
email addresses when a problem or warning occurs with a projector. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors. See your User’s Guide for more
information.
q
• Up to a maximum of three notification destinations (Addresses) can be
recorded, and notification messages can be sent to all three destinations at
once.
• If a projector develops a critical problem and suddenly stops working, it
may not be able to send a message notifying an operator of the problem.
• If Communication On is set as the Standby Mode setting in the projector’s
Extended menu, monitoring is possible even when the projector is in
standby mode (when the power is off).