Filter
Top Products
Troubleshooting
61
Network settings are not restored after cutting the connection to the computer with EasyMP Network Projection.
Network adapter information could not be obtained. Check the following:
Is a network adapter installed on the computer?
Is the driver for the network adapter used installed on the computer?
After checking, restart the computer and connect again.
If you still cannot connect, check the following:
Check the network settings on the computer and the network settings on the projector.
For details on the network settings to be made on the projector, see your User’s Guide.
One or more connected projectors do not support
resolutions greater than SXGA. Reduce the screen
resolution and reconnect.
There is a PowerLite 735c projector in the connection destination. Change the computer screen
resolution to SXGA (1280x1024) or less.
One or more projectors are not responding. You cannot connect to multiple projectors simultaneously. Check the network settings on the
computer and the network settings on the projector.
For details on the network settings to be made on the projector, see your User’s Guide.
Enter the keyword displayed on the projector screen. Check the Projector keyword displayed on the LAN standby screen, and enter the Projector keyword.
Cannot connect to the projector using this version of
EasyMP Network Connection. Install the latest version of
EasyMP Network Projection.
This message is displayed when connecting to the projector with EMP NS Connection. To connect,
install the current version of EasyMP Network Projection from the EPSON Projector Software for
Meeting & Monitoring CD-ROM supplied with the projector.
Check Remedy
Are you manually connecting to a Wireless LAN when the
computer starts up?
Quick Connection Mode
Try connecting to the Wireless LAN manually.
Error Messages Remedy