Filter
Top Products
Troubleshooting
62
Problems Concerning Monitoring and Control
Mail is not sent even if a problem occurs in the projector.
Check Remedy
Is the optional Wireless 802.11a/b/g Module connected?
For Wireless LAN
Check that the optional Wireless 802.11a/b/g Module is securely connected.
Is the network connect setting correct? Check the projector's network settings. See your User’s Guide for more information.
Is Standby Mode set to Communication On? To use the Mail Notification function when the projector is in standby, set Communication On in
Standby Mode from the Configuration Menu. See your User’s Guide for more information.
Did a fatal abnormality occur and the projector come to a
sudden stop?
When the projector comes to a sudden stop, mail cannot be sent.
If, after checking the projector, the abnormal state continues, contact Epson. See your User’s Guide for
more information.
Is power being supplied to the projector? Check that your electrical outlet or power source is functioning correctly.
Is the network cable connected correctly?
For Wired LAN
Check that the network cable is connected correctly. Reconnect it if it is not connected or not
connected properly.