Filter
Top Products
2.
When you see the A> prompt, type FORMAT B : and press
Enter. You
see this prompt:
Insert diskette for drive B:
and strike ENTER when ready
3.
Insert the diskette you want to format into drive B and press
Enter.
4. When the diskette is formatted, you see this message:
Format complete
730112 bytes total disk space
730112 bytes available on disk
Format another (Y/N)?
At this point, you can either format another diskette by pressing Y and
Enter, or return to the MS-DOS command prompt by pressing N and
Enter.
Formatting
diskettes with one diskette drive (no hard disk)
1.
Insert your working copy of the Startup/Operating 1 diskette into
drive A.
2.
Type FORMAT A: at the A> prompt and press
Enter. You see
this
prompt:
Insert diskette for drive A:
and strike ENTER when ready
3. Remove the Startup/Operating 1 diskette and insert the diskette you
want to format into drive A and press Enter.
4. When the diskette is formatted, you see this message:
Format complete
730112 bytes total disk space
730112 bytes available on disk
Format another (Y/N)?
At this point, you can either format another diskette by pressing Y and
Enter, or return to the MS-DOS command prompt by pressing N and
Enter.
Using MS-DOS with Your Equity Ie
4-11