Filter
Top Products
3.
If there is more than one page of information about the command you
selected, you see the prompt PgUp at the top of the screen. Press the
PgUp
key to display the rest of the text.
4. To return to the HELP menu, press the ESC key. Press ESC again to exit
the HELP utility.
To bypass the HELP menu and get information about one command, follow
these steps:
1.
At the command prompt, type HELP, followed by the name of the
MS-DOS command you want information about, and press Enter. For
example, to see help information for the COPY command, type the
following and press
Enter:
HELP COPY
2.
If there is more than one page of information about the command you
selected, you see the prompt PgUp at the top of the screen. Press PgUp
to display the rest of the text.
3.
Press ESC to exit the HELP program.
You can also request help information for more than one command. Follow
these steps:
1.
At the command prompt, type HELP followed by the names of the
commands you want information about. Then press
Enter.
Separate
each command name with a space.
For example, to see help information for the DISKCOPY, FORMAT,
and COPY commands, type the following and press
Enter:
HELP DISKCOPY FORMAT COPY
2.
The help information for the first command is displayed first. If there is
more than one page of information about the command you selected,
you see the prompt PgUp at the top of the screen. Press PgUp to
display the rest of the text.
3. Press
ESC
to see the help information for the next command.
4-18
Using MS-DOS with Your Equity Ie