Filter
Top Products
16 Printing From a Memory Card, Camera, or Other Device
Inserting the Card
1. Make sure the RX595 Series is turned on.
2. Open the memory card door.
3. Insert your card into the correct slot (see
page 15).
The memory card access light flashes,
then stays on.
When you want to remove the card, make sure the memory card access light is not
flashing, then pull the card straight out of its slot.
Caution:
Do not remove the card or turn off the RX595 Series while the memory card access
light is flashing; you may lose data on the card.
Selecting Photos From the Screen
1. Load Epson photo paper. See page 7 for a list.
2. Press the
Memory Card button.
3. Press l or r to select
View and Print Photos.
4. Press OK.
Note:
To print all the photos on your card, select Print All Photos. To print while viewing
a slide show of your photos, select Slide Show. For details, see the on-screen
User’s Guide. To print photos by the date they were taken, see page 17.
5. Press l or r to move through your photos and display the one that you want
to print.
6. Press
+ to select the number of copies you want of that photo.
Insert just one card at a time. The card won’t go in all the way.
Top slot Bottom slot