Filter
Top Products
Maintaining Your All-in-One 29
6. Check the nozzle check pattern that prints to see if there are gaps in the lines.
7. If there are no gaps, press
OK to continue printing.
If there are gaps or the pattern is faint, press x
Start to clean the print head.
See the next section for details.
Cleaning the Print Head
If print quality has declined and the nozzle check indicates clogged nozzles, you
can clean the print head. Print head cleaning uses ink, so clean it only if necessary.
Note:
You cannot clean the print head if an ink cartridge is low or expended. You must replace
the cartridge first (see page 32).
1. Load letter-or A4-size plain paper in the sheet feeder.
2. Press the
Setup button.
3. Select
Maintenance and press OK.
4. Select
Head Cleaning and press OK.
5. Press x
Start.
Cleaning lasts around 1 minute. When it’s finished, you see a message on the
display screen.
Caution:
Never turn off the Epson Stylus Photo RX595 Series during a cleaning cycle or you
may damage it.
6. Press x Start to run a nozzle check and confirm that the print head is clean.
Nozzles
are clean
Nozzles need
cleaning