Filter
Top Products
Maintenance 125
Clean the parts in the following order:
(1) Print head
(2) Wiper
(3) Caps
(4) Wiper rail
Moving the Print Head
This section describes how to position the print head for part cleaning.
1. Confirm that the printer is on and press #.
The Maintenance menu will be displayed.
2. Use the d/u buttons to select Head Maintenance and press the Z button.
3. Press the Z button to move the print head to the part cleaning position.
Important:
Be sure to follow the steps below when positioning the print head. Moving the print head
manually could cause malfunction.