Filter
Top Products
Basic Operations 92
White and metallic silver inks must be removed and shaken once every 24 hours.
Although a message is displayed in the control panel 24 hours after the inks were last
removed, we recommend that they be removed and shaken before the start of work.
See “How to replace” on page 143.
❏ Print check pattern.
Print a check pattern to check for clogged nozzles.
Perform head cleaning if parts of the pattern are faint or missing.
See “Checking for clogged nozzles” on page 114.
See “Head Cleaning” on page 119.
Saving Optimal Settings for the Current Media (Print Media
Settings)
A variety of media settings can be optimized for the current media and stored in the printer.
Once frequently used settings have been stored in a media setting bank, it can be recalled
to instantly optimize multiple parameters.
The printer offers a total of 30 media setting banks.
This section describes how to create media setting banks and the settings that can be
stored.
Parameters Stored in Media Setting Banks
Media setting banks store the following:
❏ Setting Name
❏ Feed Adjustment
❏ Platen Gap
❏ Head Alignment
❏ Heating & Drying
❏ Media Suction