Filter
Top Products
Basic Operations 80
2. Press the M button, select Media Remaining in the menu, and press the Z button.
3. Select Print Remaining Length and press the Z button.
4. Press the Z button to print the amount of media remaining.
Cutting Media
Use a cutter (not included) to cut the media when printing is complete. This section
described how to use a cutter to cut the media.
1. Confirm that the printer is ready to print.
2. Press the button and the Z button. The printer will feed the trailing edge of the
printed media to a position over the cutter groove.
c
Caution:
The heaters and media holding plate may be hot; observe all necessary precautions.
Failure to observe the necessary precautions could result in burns.
When cutting media, be careful not to cut your fingers or hands with the cutter or other
blades.