Filter
Top Products
Basic Operations 99
Media Tension
Increase tension if creases appear in the media during printing. The higher the value, the
greater the tension.
If you have previously performed Feed Adjustment, you will need to perform it again after
adjusting Media Tension.
See “Feed Adjustment” on page 94.
1. Use the d/u buttons to select Media Tension and press the Z button.
2. Use the d/u buttons to choose a value.
3. Select the desired option and press the Z button.
4. Press the y button to return to the customize settings menu.
Feed Speed
Choose a slower feed speed if media is creased or torn or sticks together during printing.
The lower the value, the slower the speed.
1. Use the d/u buttons to select Feed Speed and press the Z button.
2. Use the d/u buttons to choose a value.
3. Select the desired option and press the Z button.
4. Press the y button to return to the customize settings menu.
Exiting the Menus
Press W to exit the menus.
Changing Heater and Fan Settings
You can adjust heater temperature or turn the fan for the additional print drying system on
or off during printing (system included with the S50670 and optional with other models).
The default heater temperatures are as follows.
Pre-heater: 40 °C (104 °F)