Filter
Top Products
Basic Operations 40
When the Standard Media Feeding Unit Is Installed
This section uses the S70670 to illustrate the process of loading media when the supplied
media feeding unit is installed.
1. Turn on the printer by pressing the P button.
2. Loosen the roll holder fixing screws and adjust the roll holders so that the gap between
the two is wider than the media.
Center the roll supports between the roll holders.
3. Place media on the roll supports oriented according to how it is rolled (see below) and
position it as indicated by the mark on the label.
c
Caution:
Because the media is heavy, it should not be carried by one person. When loading or
removing the media, use at least two persons.
Important:
When white and metallic silver inks are installed, maintenance will be performed
automatically to prevent ink accumulating in the printer and causing clogs. Because turning
the printer off prevents maintenance being performed, leading to printer malfunction, we
recommend that the printer not be turned off.
Important:
If the right holder handle shaft is not visible, rotate the holder forward until it stops. The
media can not be properly loaded if the handle shaft is not visible.