Filter
Top Products
Paper inlet
PAPER LOAD switch
5.
When using the take-up spool, follow the steps and the illustration
below.
a)
Pull out the side of the take-up spool and insert the tip of the paper
roll into the groove on the spool as the illustration below.
b)
Rotate the spool two or three times to secure the paper and reinsert
the side of the take-up spool as the illustration below.
2 or
c)
Install
the
take-up spool in the printer.
6.
Tear off the receipt paper on the cutter; then close the printer cover.
,
%
Note:
When
the
printer cover is open,
the
PAPER
FEED
button is
inactive.
Setting Up the Printer
1-17